Precise miter saw A very versatile miter saw, bevels and miter combinations Preset angle positions: 45 °, 30 °, 22.5 °, 15 °, 90 °, 15 °, 22.5 °, 30 °, 45 ° Cut-off button for easy disc change Quiet operation thanks to belt drive Delivery with HM blade 300 x 30 mm Upper table with guide and riving knife, parallel and transverse stop (KGS33) Technical data: Voltage: 230V, 50/60 Hz Power: 1,100 W Revolutions: 3.700 rpm. Weight: 19 kg Disc: Ø 300 mm Cutting possibilities: 0°/0°; 0°/45°; 45°/0°; 45°/45°: 95 x 160; 95 x 110; 64 x 160; 64 x 75 mm Cutting capacity on the upper table: 50 mm Table dimensions: 307 x 375 mm ...
KG94 edge cutter KG94 cutter for edges made of PVC, polyester, melamine, etc. Description: The KG94 cutter enables the cutting of veneer ends with a thickness of up to 1.2 mm. Technical data: max. veneer thickness 1.2 mm max. veneer width 45 mm ...
KF300 single-spindle copier-milling machine Pneumatic profile rotation in the range of 0-90 degrees Pneumatic clamps Cooling spray device two 5/8/10 mm pneumatic tracing fingers Running on rod bearings Working area 2600x250x200 mm Smooth speed control in the range from 0-12000 rpm Copying depth 130 mm ...
KF228N duplex copier milling machine Pneumatic tracing fingers Pneumatic double clamp horizontally Spray cooling system Two speed milling motor High-performance coolant 0.5L Maintenance kit New copy disc Copy plate "Standard", milled Custom copying plate, milled ...
KF227D single spindle copier milling machine Pneumatic double clamp horizontally For setting 3 routing depths with the new copying plate (three-phase current) The 260 * 150 milling field is sufficient for the profiles offered on the Polish market Scale stops for milling rectangular shapes Spraying cooling system 1.1 kW 3-phase motor or optional 1-phase Engine speed 2680 rpm Spindle revolutions 12000 rpm or optionally 6000 rpm The tracing finger is adapted to quickly change the diameter of the cutter to 5/8 / 10mm Safe turning of the milling cutter by pressing the button in the handle Protection against turning on the cutter without pressure of the workpiece Machine guard to prevent the swarf from blowing around the machine Maintenance kit New copy plate for standard profiles included in the price of the machine Custom copying plate, optionally milled ...
Drilling, milling and milling machine KF130SA Vertical copier-milling unit on top Hydropneumatic bottom feed Pneumatic pressure device Centralizing rule with 2 locking plates, displaced by handwheel with crank Length limiter system with 7 fixed handle positions from 120mm to 1200mm with one right / left stop plate A centered ruler with integrated handles for 7 fixed positions of the handle with a centralizing system, a sliding wheel with a crank Separate stop plate for the gauge system Protective mask HSSE- shank cutter 8x14x100 / 8, with ground shoulder (double) HSSE- shank cutter 8x14x80 / 8 High-performance coolant 0.5L ...
KF130S drilling, milling and latch milling machine Vertical copier-milling unit on top Handheld bottom drilling unit Pneumatic pressure device ...
2550J Machining Center: Single-head, three-axis, numerically controlled drilling and milling center for processing aluminum, light metal alloys, PVC and steel profiles. Due to the possibility of changing the spindle speed settings, the center enables processing of PVC profiles with an integrated steel section inside them. Reduced milling feeds, appropriate spindle speed and appropriately selected tools will allow for simultaneous processing of these materials. The center is equipped with one vertical machining head and a positioned rotating beam for machining planes at angles: -90 / 0 / +90 degrees. The software integrated with the center provides a wide range of machining possibilities in the field of milling and drilling technological holes. Easy-to-use, intuitive operator's screen menu based on macros assigned to specific machining operations, thanks to which the operation of the executive software is simple and fast without unnecessary waste of time. If there is a need...
Industrial vacuum cleaner WEGOMA ASC482U
Industrial vacuum cleaner WEGOMA ASC482U Professional wet and dry vacuum cleaner Can be attached to all tools Double filtration system Easy to move the vacuum cleaner Technical data: No. 41000025 Voltage: 230V, 50/60 Hz Power: 1200 W Suction: 240 m³ / h Weight: 13 kg Tank capacity: 25 l Tool socket: max. 2000 W....
Industrial vacuum cleaner WEGOMA AS382L
Industrial vacuum cleaner WEGOMA AS382L Professional wet and dry vacuum cleaner Can be attached to all tools Double filtration system Easy to move the vacuum cleaner Technical data: No. 41000005 Voltage: 230V, 50/60 Hz Power: 2300 W Suction: 170 m³ / h Tank capacity: 72 l Tool socket: max. 2000 W. Cable length: 8 m ...
Industrial vacuum cleaner WEGOMA AS282K
Industrial vacuum cleaner WEGOMA AS282K Professional wet and dry vacuum cleaner Can be attached to all tools Double filtration system Easy to move the vacuum cleaner Technical data: No. 41000001 Voltage: 230V, 50/60 Hz Power: 1200 W Suction: 170 m³ / h Tank capacity: 72 l Tool socket: max. 2000 W. Cable length: 8 m ...
Industrial vacuum cleaner WEGOMA AS182K
Industrial vacuum cleaner WEGOMA AS182K Professional wet and dry vacuum cleaner Can be attached to all tools Double filtration system Easy to move the vacuum cleaner Technical data: No. 41000000 Voltage: 230V, 50/60 Hz Power: 1200 W Suction: 170 m³ / h Tank capacity: 27 l Tool socket: max. 2000 W. Cable length: 8 m ...
HDF CNC4 milling machine for the gasket with adjustable cutter position. The device enables milling under the gasket in the rebate and under the glass for two profiles at the same time Adjustable position of 4 cutters by motors in 8 axes on linear bearings with ball screw drives pneumatic profile clamping This innovative solution allows for unprecedented performance because milling is performed simultaneously with 4 cutters on both profiles Thanks to the setting of the aggregates using the CNC control, we also have unlimited possibilities in the field of setting subsequent profiles as well as simple corrections in the event of changes in profile tolerances. No tools are required to switch between systems The machine has a simple interface with a color touchscreen for data entry and a simple sequence of selecting and changing profiles. Now every manufacturer working on multiple systems has the ability to work with all profiles on one device at no additional cos...
HDF4-4 gasket milling machine Adjustable cutter position. The device enables milling under the gasket in the rebate and under the glass for two profiles at the same time. Adjustable position of the milling disc for 3 or 4 positions of the glass seal. Additional horizontal milling aggregate for the center seal. Profile width 50-80mm profile height max 130mm Engine power 0.55kW Power supply 400V 50 / 60Hz, Pneumatic supply 6-8Bar Dimensions 900 * 550-1800 Weight 110 kg additional options Fixed support arm 1300mm 800mm extendable support arm Preparation for chip extraction consisting of connections for hoses for extraction, electrical connection for extraction, max 4A Stationary haul off with chip bag and 2 m connecting cable Additional milling discs (2 pcs) for enlarged profiles ...
hand drill under the handle ST448 - 3-spindle drill for drilling holes for the handle. - device mounted in a holder for a stationary drill with a speed of 1400 rpm - is used in the production of PVC and wood windows - spacing between drills 21.5mm - weight of the device about 2.4 kg - simple and reliable device to use, recommended for companies starting production...
Rotary screwdriver in the GVPS pistol grip large, adjustable screwing power from 1.0 -3.5Nm reinforced type enables screwing through steel for connecting the screw feeder optional additional manual coin mechanism ...
Saw for glazing beads GL142P with automatic feed 45 degree cut Cutting two slats at the same time Two cutting discs and two scoring discs Adjusting the height of the table in relation to the slats Possibility to purchase a saw with gearboxes for slats ...
Saw GL 142 M for glazing beads with manual feed 45 degree cut Cutting two slats at the same time Two cutting discs and two scoring discs Adjusting the height of the table in relation to the slats Possibility to purchase a saw with gearboxes for slats ...
FTB100 - BDM PVC profile cutting and processing center Application: A fully automated production line for PVC profiles, intended for use in areas such as: doors, windows. Technical Specifications: • Maximum profile dimensions: 130 mm long / 130 mm high / 6500 mm wide. • Saw blade diameter: 550 mm / 600 mm • The minimum length of the section after cutting: 250 mm for a profile with a height of 60 mm • Positioning speed: up to 300m / min • Trimming angles 30 ° to 90 ° to 150 ° Characteristic: • By design, the FTB is a modular machine. It enables the introduction of individualized solutions and the configuration of individual units so as to optimally meet the user's assumptions and optimize the functionality of the production process; • Cutting and processing of profiles with steel reinforcements; • Movement of the profile gripper with an extremely fast linear motor; • All operations possible, ie: milling, drilling, punching; • Automatic assembly of st...