BDM UFTB 100 S machining center
Door and window processing station for processing PVC profiles by BDM, independent of the shape of the profile. Model UFTB 100S
- Maximum cross-section 130 x 130 mm
- Maximum element length: 4,000 mm
- Guiding profiles on the side
- Efficiency: about 80-100 tilt and turn window units with dimensions of 1200 mm x 1200 mm, at 100% availability, for 8 hours, 28,800 s
Performed treatments:
FRAME:
- 2 pairs of drains
- 2 pairs of vents
- 4 x screws / element
- 4x marking for hooks (each 1 mark per profile)
- 6 dowel holes
-
WINGS:
- 2 pairs of drains
- 2 pairs of vents
- 1 * triple hole for the handle in PVC and milling of the espagnolette
- 4 x screws / element
Loading magazine with 8 places, automatically clocked.
With 8 places to receive various window profiles with a maximum length of 4,500 mm and a minimum length of 300 mm.
Profile transporter with a basic frame with a guide for moving elements and a pneumatic gripper running on hardened and ground rolling guides.
The trolley is driven by hardened oblique toothed racks with a direct linear measuring system.
Accurate and quick displacement of the profiles for machining is realized by the dynamic system of the servo axes.
- Positioning accuracy +/- 0.2 mm / m
- Positioning speed max. 170 m / min
3-axis - CNC machining station
- Stable, welded base frame
- tool guidance on hardened and ground linear guides with ball recirculation carriages.
- With Twin Tool Module
- for mounting tools that can hold up to 18 work units.
- Positioning by servo drives and hardened, ground ball screws in the X, Y and Z axes with x pitch
- Pressing units for machining units, for mounting profiles from the side and from above
- Profile supports for receiving profiles in processing units.
Standard equipment included in the following set:
- A device for screwing steel reinforcements at the front with a servo motor with speed control and possible adjustment of the screwing torque for each profile and reinforcement separately.
- Device for screwing steel reinforcements at the rear with a servo motor with speed control and possible screwing torque adjustment for each profile and reinforcement separately.
- the system includes a tray for screws and a screw feeder 5 pcs of milling units 5mm each, 1x rear, bottom, top and front upper and lower front (top, bottom and back with a 3 mm diameter tip) to perform the operation:
- Drainage holes, ventilation holes,
- Openings in the wings
- The box for the lock insert in the wings
- Holes for fixing roller shutters
- Openings for diffusers
- PZ, for stress relief and assembly holes
- One triple hole for the door handle
- 1 for drilling holes for dowels or a crossbar on the front side (6.5 mm)
- 1 for drilling holes for dowels or a crossbar on the rear side (10.5 mm)
Optional pneumatic head angle adjustment
- It allows you to change the angle of the milling cutter between two positions.
- Pneumatic control
Belt conveyor 3000
- 9 segment
- 3000 mm long,
- Made of strong pressed anodised aluminum profiles
- Abrasion-resistant and stable long round belts
- for unloading and reloading profiles
- Special BJM control panel - Windows PC
Control software
Barcode scanner for reading / identifying loaded items
Security enclosure and fencing according to CE standards